thermalviewer_hti 2.1

Reviews

2 ★, on 2020-08-27
not very good always starts in mirror mode and differentiation of colours is poor. could be ht 102 is not that good. at the moment not worth the money.

3 ★, on 2019-04-10
When you check dynamic range and then uncheck it, it does not return to the original mode (i.e. There is 1 original mode, then you check dynamic range and there is a second mode, then you uncheck dynamic range and there is a third mode). You cannot return to original mode without restarting the app. Orientation lock on phone is not respected by the app, and the camera has to be re-selected everytime the phone is turned on its side. The image edges in dynamic range mode are ridiculously noisy

4 ★, on 2019-10-04
Works very well on my Samsung S9. The thermal overlay on the camera image can be a bit offset at close distances as the bottom thermal camera is too far from the top optical camera, but it's absolutely fine for finding cold spots around the house. Crashes occasionally when switching between modes, but otherwise I'm pretty happy with it.

2 ★, on 2019-09-30
The dynamic and static function is good but.... Most of the times I only want to see little differences and dynamic function ruins this cause it focuses every new heat area in range. The only thing that should be improved is a function where we can give a celsius interval and the camera would only color. In that interval and everyting below would be minimum and everything higher would be maximum.With this improvement it yould be 5 star app instead of 2.

2 ★, on 2020-07-10
Tested with HTI-301 Does not work and crashes.

3 ★, on 2019-01-19
works, but does not respect landscape/portrait lock, needs to reinit cam when orientation is changed, no color for temp. below 10 degrees C (all screen is green). DEV! I want source/github to improve.