About this app

ISO-5167 Flow Rate Calculations is a mobile application for Android, intended for both experts in the field of automation and metrology, and students of technical specialties. It implements methods for calculating the flow rate of liquids, vapors and gases by measuring the differential pressure on primary devices as the substances pass through them.
These methods are regulated by the ISO-5167 standard and consider the following primary devices:

- Orifice Plates
- ISA 1932 Nozzles
- Long Radius Nozzles
- Venturi Nozzles

The program accept some input parameters related to both the design of the primary device and the physical properties of the measured substance. Many water and vapor properties, such as density, viscosity, adiabatic index and so on are calculated automatically depending on the pressure and temperature of the measured substance.
The program consists of three main screens:
- The first screen is for selecting the type of the primary device and the substance to be measured.
- The second screen is the main. It opens with pre-set data of a valid example. Here the user of the program can change any parameters of the primary device and the physical properties of the measured substance. Any changes in input data result in immediate recalculation or differential pressure on the device with unchanged flow rate or a change in flow with a constant differential pressure. It depends on the direction of calculation.
The main calculations, however are the calculations of the flow at a given differential pressure or a derivation of a differential pressure at a given flow rate.
This screen also has a menu, where you can save the current calculation, open a list of saved calculations, rename and delete some.
An initial correct calculation example can not be deleted and can only be saved under a different name.
If an error occurs when entering the device or substance properties, the program will notify with the pop-up window. The cause of the error can be seen in the report, in the third screen.
- The third screen is designed to provide a calculation order, displaying intermediate values, to show an iterative process, and output possible error messages.
This software uses the open-source IF97 water/steam properties library by Hummeling Engineering BV (www.iapws-if97.com).