About this app
ZooZee is an intelligent vacuum robot equipped with autonomous localization and navigation ability. With its bright eyes (the laser range scanner) and brilliant brain (the core algorithm chip), it explores its surrounding environment automatically and plans an ideal path for sweeping.
Meanwhile, it keeps the areas where it has cleaned in mind and will load the maps of those areas quickly in its next task. ZooZee improves its working efficiency via continuous learning so as to realize a clever walking as well as a clean sweeping.
With ZooZee mobile application and cloud services, you can remotely schedule cleaning tasks for your vacuum robot, check its performance and even directly control the work of your robot in real time.
[Spot Sweeping]
You can choose a point on the map where you want ZooZee to sweep. Once click the Start button, ZooZee will automatically go to the chosen place and start sweeping that area.
[Set Sweeping Area]
You can set one or more sweeping areas on the map via ZooZee mobile application and name for each one. Each area support to set its sweeping times respectively.
[Software Virtual Wall]
You can add one or more software virtual walls on the map via ZooZee mobile application to limit the working area of ZooZee. Without additional accessories like beacons, save your labor, time and money.
[Restricted Area]
You can add one or more restricted areas on the map via ZooZee mobile application. Once you add the areas successfully, ZooZee will not enter those areas during sweeping and the restricted areas will be saved for future usage, so you don’t need to set it repeatedly.
[Task Resume]
If the ZooZee battery gets lower than 20%, it will automatically go back to the charging station to fully recharge itself and then automatically return to where it left off and complete the rest task.
[Restart Localization]
If ZooZee is moved elsewhere manually or unexpectedly during sweeping, it will restart localization. Once ZooZee restarts localizing itself successfully, it will resume the unfinished task and make up for the areas left out.
[Task Schedule]
ZooZee mobile application supports to schedule sweeping tasks for ZooZee. You can schedule a sweeping task to occur only once or repeatedly. ZooZee will start sweeping task at the scheduled time and then go back to the charging station automatically.
[Do Not Disturb Mode]
You can enable the silent mode via ZooZee mobile application. During this mode, ZooZee will not resume sweeping for paused tasks and not send out voice prompts automatically.
[Parental Lock]
ZooZee mobile application supports to enable parental lock mode. Once enabled, ZooZee will only support to reset WiFi, power on and power off, and you cannot start sweeping or spot sweeping by clicking the buttons on the robot. If you want you start a sweeping task for your ZooZee, you can only set it in your mobile application.
App Permissions
Allows applications to access information about networks.
Allows applications to open network sockets.
Allows applications to access information about networks.
Required to be able to access the camera device.
Allows an application to write to external storage.
Allows an application to read from external storage.
Allows an app to access approximate location.
Allows an app to access precise location.
Allows applications to access information about Wi-Fi networks.
Allows applications to change Wi-Fi connectivity state.
Allows using PowerManager WakeLocks to keep processor from sleeping or screen from dimming.
Allows read access to the device's phone number(s].
Allows an application to receive the ACTION_BOOT_COMPLETED that is broadcast after the system finishes booting.
Allows an application to change the Z-order of tasks.
Allows read only access to phone state, including the phone number of the device, current cellular network information, the status of any ongoing calls, and a list of any PhoneAccounts registered on the device.
Allows an application to request installing packages.
This constant was deprecated in API level 21. No longer enforced.
