About this app

Gypsum board ceiling is a new method of covering the underside of the roof space in a building previously done with soft boards, chipboard, tongue and groove jointed timber. Its advantageous to use gypsum board ceiling because of the many good properties it has which include but not limited to good fire resistance, easy to fix and light weight.

When choosing decorations for the ceiling, it is important to keep it bright. This allows light reflection in the room during the day and night. The patterns should be span across the room around ceiling light fittings. This is to allow the light illumination to focus on this appearances above. The pastes should be done within a framework of patterns. This is done using masking tape shaped to the desired patterns. Rollers are used to spread this pastes.

Ceiling lights can be placed in various positions in a room. The normal areas are at the central point in a room. In living rooms, the illumination required changes over time. When meals are over, a quite environment can be created. This is by using different positions of the light fixtures. The ceiling lights can be exposed, recessed or hung normally. The illumination can also be enhanced by using colored bulbs. It is important to conserve power when using the different light fixtures.

The gypsum ceiling can be formed to accommodate different points of the light fixtures. Straight fluorescent tubes are usually placed on the edge of the ceiling and the wall. Down lighters can be placed on four corners of the room soffits. To get the different light effects in a room, the ceiling is designed to allow a hollow place to fit the fixtures. The wiring is done normally but with different switches. The dimmer switchers can also be used to enhance the light effects in the room.

The light feature points on a gypsum ceiling are first identified. The recessed point is formed by cutting out the gypsum boards. A hole of one by three feet is done the room corners. This is at intervals of five feet apart. The ceiling is shaped to allow for the recess. The depth of the hole is half a foot. A gypsum hollow box is formed. It is one by three feet long. The electrical conduit is placed up into the recess point. Wiring is also done from the room control point.

Building ceilings are usually flat and are painted one color. This is normally a bright color. Decorative features can be added to the ceilings. This can be done using pastes, creams or paint. Patterns may also be incorporated for different room uses. This also allows two or more colors to be painted on the soffits. The features may be soft or hard rustic appearances. This are done usually after the base coats of paint are applied to the room soffits.

Thank You for Downloading This Application
Have Great Gypsum Ceiling for Your House

App Permissions

Allows applications to open network sockets.
Allows applications to access information about networks.