About this app

If youre wondering how to build a everyone chair, here is a step-by-step tutorial for a simple DIY everyone Chair. A friend of ours made this chair and took step-by-step photos so that we could share this project with you.

{title} is a unique application specifically designed for you. WITH content that contains ideas furniture, ideas sofa, ideas @key and ideas hutch and enjoy the changes you make around you. sofa A complete guide that will help you to make desk you like.

Recently we shared another step-by-step tutorial for a DIY Basic Bookshelf and we plan to continue to share more DIY basic carpentry projects for you here at 5 Minutes for Mom.

Ideas in this application such as furniture, idea sofa and idea @key will satisfy you, with furniture will make your family happy. with furniture Do not worry if you are not an expert in this field. By using our application that contains ideas furniture, ideas sofa, ideas @key and ideas hutch will help you improve your skills.
All tutorials {title} that we make, contain hutch, then desk and furniture. You will be happy with the quality of the photos and how easy it is to meet your daily needs.

DIY projects give you the thrill of building something yourself and the satisfaction of saving money. Be sure to also check out our DIY category and follow our Pinterest DIY board.

Supplies Needed:

1 1x3x6 wood

1 1x4x4 wood

1 2x2x6 wood

MDF/Plywood 15 1/2 x 14-inch Piece

1 1/4-inch Pocket Hole Screws

Miter Saw or Handsaw

Kreg Jig

Sander

Wood Glue

Directions:

1. Begin by cutting all your wood. If you dont have a way to cut it yourself or you simply dont want to, most lumber or hardware stores will cut it for free if you buy it through them. Below are the cuts you need for each board.

For the 1x3x6:

3 Pieces at 11.5 inches each

2 Pieces at 12 inches each

For the 1x4x4 (a 1x4x6 will most likely be the easiest to find):

3 Pieces at 15.75 inches each

For the 2x2x6:

2 Pieces at 2 feet each

2 Pieces at 1 foot each

2. After all your wood has been cut, its time to assemble it. Your 22 pieces are your legs. The longer ones are the back legs. The 14 pieces are the backrest of the chair. One of those 14 pieces is what the seat of the chair is going to rest on. Using your kreg jig, put two pocket holes on each end of all of the 1x4s. You only need to put pocket holes on one side of the board for a total of 4 pocket holes in each 14.

3.Lay both of your back legs down (the longest 22 pieces) and using one of the 14 pieces, measure a foot down the leg, and screw the 14 in place. From the top of the 14 to the tip of the leg should measure one foot. Be sure that your pocket holes are facing up so they will be hidden once the seat is in place. Refer to photos for any confusion. Be sure that both legs are attached to the 14.

4.Take two of your shorter 1x3s and two of your longer 1x3s put pocket holes in both ends, the same way you did for the 1x4s in the previous step. Attach both of the shorter pieces to each leg with their ends resting against the 14 you already have in place. The pocket holes will be facing out and the screws will actually be going into the 14 piece but the board will be resting against both the leg and the 14, standing up on its end. Do the same thing with your two longer pieces as well, just rest them against the shorter 1x3s already in place.

download for more details

New features

- Fix Bugs